BOL High Speed Charger with LCD Display at AirsoftShogun

BOL High Speed Charger with LCD Display
[40-8787A]

SKU / Product Number: 40-8787A

High speed sample rate negative delta voltage and zero voltage auto-detect cut off circuit with MOSFET control for peak detection. Pulsation chager method to prevent overcharge and overheat.

Charger Ni-MH battery by Zero delta voltage technology without using thermo-detection probe.

Auto-detect switching mode charge for Ni-CD and Ni-MH battery.

Front panel with " MODE" buttons and dial log to switch between: CHARGE, DISCHARGE, 1 CYCLE and 3 CYCLE.

"DIAL LOG" to select charging current from 0.5A ~ 6.0A, 0.1A step up.

3 LED indicator for SLOW CHARGE, FAST CHARGE and DISCHARGE.

4 Digit LCD display with back-light showing output V, output A and capacity mAh information.

8-bits 8MHz CPU with 8KB ROM, 1KB RAM, 8 channel 10bit AD and 8-bit PWM crrent control.

Volt threshold 4mV/cell for Ni-CD and Ni-MH battery.

Auto-detect the number of cells of the battery.

Trickle current ( 0.1A ) after any mode finished.

Reverse polarity protection system.

Charge battery pack with combination 1 ~ 15 cells.

Auto detect switching power supply input 110~220V AC or 12V DC.

Build in 5A discharge device for single or cycling discharge.

6 cm cooling fan to enhance the performance.

Product Specifications

Input Voltage: DC 12.0V ~ 13.8V ( AC 110V ~ 240V )

Number of Cells: 1 ~ 15 cells

Battery Voltage Range: 1.2V to 18.0V come with AC adaptor (SPS120V7A-T)
Charging Current: 0.5A to 6.0A
Discharging Current: 5A
Made in: Hong Kong